ChartPluginTests < TWiki

---+ Chart Plugin Tests

This page attempts to demonstrate/test many of the possible combinations of various parameters of the ChartPlugin.  There are too many combinations of parameters to test all possible combinations that only a limited number are shown here.

%TOC%
---

---+ Tables used by tests

The following 4 tables are used for testing purposes.
---++ Table #1
%TABLE{name="table1"}%
|*Nr*|*Period*|*Min*|*Acceptable*|*Target*|*Exceptional*|*Actual*|*Comment*|
| 1 | Start | 0 | 50 | 70 | 90 | 39 | initial measure |
| 2 | FY03-Q1 | 0 | 35 | 75 | 95 | 55 |  |
| 3 | FY03-Q2 | 0 | 35 | 75 | 95 | 36 |  |
| 4 | FY03-Q3 | 0 | 40 | 80 | 100 | 62 |  |
| 5 | FY03-Q4 | 0 | 40 | 80 | 100 | 72 |  |
| 6 | FY04-Q1 | 0 | 40 | 80 | 100 | 68 |  |

---++ Table #2
This table is the same as the 1st except that the data is row oriented instead of column oriented.

%TABLE{name="table2"}%
| *Nr* | 1 | 2 | 3 | 4 | 5 | 6 |
| *Period* | Start | FY03-Q1 | FY03-Q2 | FY03-Q3 | FY03-Q4 | FY04-Q1 |
| *Min* | 0 | 0 | 0 | 0 | 0 | 0 |
| *Acceptable* | 50 | 35 | 35 | 40 | 40 | 40 |
| *Target* | 70 | 75 | 75 | 80 | 80 | 80 |
| *Exceptional* | 90 | 95 | 95 | 100 | 100 | 100 |
| *Actual* | 39 | 55 | 36 | 62 | 72 | 68 |
| *Comment* | initial measure | | | | | |

---++ Table #3
This table is used for showing =scatter= graphs.

%TABLE{name="table3"}%
| *A* | *B* | *C* | *D* | *E* |
| 1   | 3   | 6   | 33 | 2  |
| 1.4 | 6   | 22  | 2  | 4  |
| 1.8 | 2   | 5   |    | 6  |
| 2.5 | 4   | 3   |    | 8  |
| 4   | 7   | 6   | 43 | 10 |
| 5   | 13  | 44  | 25 | 12 |
| 7   | 8   | 1   | 4  | 14 |
| 6   | 35  | 3   | 8  | 16 |
| 8   | 2   | 22  | 4  | 18 |
| 9   | 7   | 6   | 13 | 20 |
| 8.3 | 25  | 33  | 23 | 2  |
| 7.4 | 9   | 9.4 | 23 | 23 |

---++ Table #4
This table is used for various legend placement tests as well as logarithmic data.

%TABLE{name="table4"}%
| | line 1 | line 2 | line 3 | line 4 | sparse 1 | sparse 2 | semilog line |
| 1990 | 0 | 0 | 0 | 0 | 0 | | 0.2 |
| 1991 | 0 | 0 | 0 | 0 | | 35 | 1 |
| 1992 | 2 | 12 | 22 | 32 | 35.5 | | 5 |
| 1993 | 3 | 20 | 20 | 33 | 38 | 35.2 | 25 |
| 1994 | 3 | 20 | 19.5 | 33 | 38.1 |  | 125 |
| 1995 | 39 | 38 | 37 | 36 | | 35.8 | 625 |
| 1996 | 40 | 40 | 40 | 40 | 38.1 |  | 3125 |
| 1997 | 40 | 41 | 42 | 43 | | 35 | 15625 |

---++ Table #5
This table is used to show some edge cases including that non-numeric cell values are parsed correctly
and that all zero values is charted correctly.

%TABLE{name="table5"}%
| *Date* | data col 1 | data col 2 | data col 3 |
| 2011-01-01 | 10 | 0 | 1.0e10 |
| 2011-01-02 | 10 | -1.3 | 2.0e10 |
| 2011-01-03 | 10 | <u>12</u> | 2.2e10 |
| 2011-01-04 | 10 | <b>20</b> | 2.0e10 |
| 2011-01-05 | 10 | [[http://google.com][20]] | 1.95e10 |
| 2011-01-06 | 10 | %RED%29%ENDCOLOR% | 3.8e10 |
| 2011-01-07 | 10 | tag33 | 4.0e10 |
| 2011-01-08 | 10 | $ltsomething$gt41 | 4e10 |

---++ Table #6
This table is used for testing when both =data= and =data2= are used
(displaying data on both the left Y-axis and right Y-axis).
%TABLE{name="table6"}%
|*Col1*|*Col2*|*Value3*|*Value4*|*Value5*|*Value6*|*Value7*|
| 1 | A | 3 | 4 | 5 | 6 | 7 |
| 2 | B | 3 | 4 | 5 | 6 | 7 |
| 3 | C | 3 | 4 | 5 | 6 | 7 |
| 4 | D | 3 | 4 | 5 | 6 | 7 |
| 5 | E | 3 | 4 | 5 | 6 | 7 |
| 6 | F | 3 | 4 | 5 | 6 | 7 |
| 7 | G | 30 | 40 | 50 | 60 | 70 |
| 8 | H | 300 | 400 | 500 | 600 | 700 |

<!--
  -- The following line is an undocumented API that is only designed to make
  -- this topic page easier to read.
   * Set ParamOutputColor = %BR%%BR% =%<nop>CHART{%PARAMS%}<nop>%= | %GREENBG% %IMG% %ENDCOLOR%
%CHART_PARAMOUTPUT{%ParamOutputColor%}%

-----------------------------------------------------------
-- Define the line tests
-----------------------------------------------------------
   * Set lineTest01 = name='lineTest01' table='table1' type='line' data='R2:C7..R7:C7' ygrid='off'
   * Set lineTest02 = name='lineTest02' table='table1' type='line' data='R2:C7..R7:C7' title='line test #2'
   * Set lineTest03 = name='lineTest03' table='table1' type='line' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='line test #3'
   * Set lineTest04 = name='lineTest04' table='table1' type='line' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='line test #4' yaxis='on'
   * Set lineTest05 = name='lineTest05' table='table1' type='line' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='line test #5' yaxis='on' ymin='0'
   * Set lineTest06 = name='lineTest06' table='table1' type='line' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='line test #6' yaxis='on' ymin='0' ymax='150'
   * Set lineTest07 = name='lineTest07' table='table1' type='line' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='line test #7' yaxis='on' ymin='0' ymax='100' ylabel='Hello there'
   * Set lineTest08 = name='lineTest08' table='table1' type='line' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='line test #8' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' numygrids='5'
   * Set lineTest09 = name='lineTest09' table='table1' type='line' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='line test #9' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' numygrids='2'
   * Set lineTest10 = name='lineTest10' table='table1' type='line' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='line test #10' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label'
   * Set lineTest11 = name='lineTest11' table='table1' type='line' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='line test #11' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='on'
   * Set lineTest12 = name='lineTest12' table='table1' type='line' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='line test #12' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box'
   * Set lineTest13 = name='lineTest13' table='table1' type='line' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='line test #13' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box' legend='R1:C7..R1:C7'
   * Set lineTest14 = name='lineTest14' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #14' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box' legend='R1:C4..R1:C7'
   * Set lineTest15 = name='lineTest15' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #15' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box' legend='R1:C4..R1:C7' colors='#ffAAAA,#AAffAA,#AAAAff,#AAAAAA'
   * Set lineTest15b = name='lineTest15b' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #15b' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box' legend='R1:C4..R1:C7' colors='transparent,#AAffAA,#AAAAff,#AAAAAA'
   * Set lineTest16 = name='lineTest16' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #16' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7'
   * Set lineTest17 = name='lineTest17' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #17' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' bgcolor='#EEEEFF'
   * Set lineTest18 = name='lineTest18' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #18' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' bgcolor='#FFFFFF #EEEEFF'
   * Set lineTest19 = name='lineTest19' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #19' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' bgcolor='#EEEEEE #EEFFEE'
   * Set lineTest19b = name='lineTest19b' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #19b' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' bgcolor='transparent #FFFFFF'
   * Set lineTest19c = name='lineTest19c' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #19c' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' bgcolor='#FFFFFF transparent'
   * Set lineTest19d = name='lineTest19d' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #19d' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' bgcolor='transparent transparent'
   * Set lineTest20 = name='lineTest20' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #20' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='on'
   * Set lineTest21 = name='lineTest21' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #21' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off'
   * Set lineTest22 = name='lineTest22' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #22' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off' xgrid='on'
   * Set lineTest23 = name='lineTest23' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #23' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off' xgrid='off'
   * Set lineTest24 = name='lineTest24' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #24' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off' xgrid='off' width='450'
   * Set lineTest25 = name='lineTest25' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #25' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off' xgrid='off' width='450' height='150'
   * Set lineTest26 = name='lineTest26' topic='ChartPluginTestsRemote' table='tableRemote2' type='line' data='R4:C2..R7:C7' xaxis='R2:C2..R2:C7' title='line test #26' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R4:C1..R7:C1' ygrid='off' xgrid='off'
   * Set lineTest27 = name='lineTest27' topic='ChartPluginTestsRemote' table='tableRemote2' type='line' data='R4:C2..R8:C7' xaxis='R2:C2..R2:C7' title='line test #27' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R4:C1..R8:C1' ygrid='off' xgrid='off'
   * Set lineTest28 = name='lineTest28' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #28' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off' xgrid='off' alt='This is the alt tag for test28'
   * Set lineTest29 = name='lineTest29' table='table5' xaxis='R2:C1..R999:C1' data='R2:C3..R999:C3' xaxisangle='1' title='line test #29' datalabel='box' ygrid='on' yaxis='on'
   * Set lineTest30 = name='lineTest30' table='table5' xaxis='R2:C1..R999:C1' data='R2:C4..R999:C4' xaxisangle='1' title='line test #30' datalabel='box' ygrid='on' yaxis='on'
   * Set lineTest31 = name='lineTest31' table='table5' xaxis='R2:C1..R999:C1' data='R2:C2..R999:C2' xaxisangle='1' title='line test #31' datalabel='box' ygrid='on' yaxis='on'
   * Set lineTest32 = name='lineTest32' table='table5' xaxis='R2:C1..R999:C1' data='R2:C2..R999:C2' xaxisangle='1' title='line test #32' datalabel='box' ygrid='on' yaxis='on' ymin='10'
   * Set lineTest33 = name='lineTest33' table='table5' xaxis='R2:C1..R999:C1' data='R2:C2..R999:C2' xaxisangle='1' title='line test #33' datalabel='box' ygrid='on' yaxis='on' ymax='10'
   * Set lineTest34 = name='lineTest34' table='table5' xaxis='R2:C1..R999:C1' data='R2:C3..R999:C3' xaxisangle='1' title='line test #34' datalabel='box' ygrid='on' yaxis='on' ymin='0' ymax='123'
   * Set lineTest35 = name='lineTest35' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #35' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' ytics='2'
   * Set lineTest36 = name='lineTest36' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='line test #36' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' ytics='5'

-----------------------------------------------------------
-- Define the area tests
-----------------------------------------------------------
   * Set areaTest01 = name='areaTest01' type='area' data='R2:C7..R999:C7' xaxisangle='1' ygrid='off'
   * Set areaTest02 = name='areaTest02' type='area' data='R2:C7..R999:C7' xaxisangle='1' ygrid='off' title='area test #02'
   * Set areaTest03 = name='areaTest03' type='area' data='R2:C7..R999:C7' xaxisangle='1' ygrid='off' title='area test #03' xaxis='R2:C2..R7:C2'
   * Set areaTest04 = name='areaTest04' type='area' data='R2:C7..R999:C7' xaxisangle='1' ygrid='off' title='area test #04' xaxis='R2:C2..R7:C2' yaxis='on'
   * Set areaTest05 = name='areaTest05' type='area' data='R2:C7..R999:C7' xaxisangle='1' ygrid='off' title='area test #05' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0'
   * Set areaTest06 = name='areaTest06' type='area' data='R2:C7..R999:C7' xaxisangle='1' ygrid='off' title='area test #06' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ymax='150'
   * Set areaTest07 = name='areaTest07' type='area' data='R2:C7..R999:C7' xaxisangle='1' ygrid='off' title='area test #07' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ymax='150' ylabel='Hello there'
   * Set areaTest08 = name='areaTest08' type='area' data='R2:C7..R999:C7' xaxisangle='1' title='area test #08' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ymax='150' ylabel='Hello there' numygrids='5'
   * Set areaTest09 = name='areaTest09' type='area' data='R2:C7..R999:C7' xaxisangle='1' title='area test #09' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ymax='150' ylabel='Hello there' numygrids='2'
   * Set areaTest10 = name='areaTest10' type='area' data='R2:C7..R999:C7' xaxisangle='1' title='area test #10' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label'
   * Set areaTest11 = name='areaTest11' type='area' data='R2:C7..R999:C7' xaxisangle='1' title='area test #11' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='on'
   * Set areaTest12 = name='areaTest12' type='area' data='R2:C7..R999:C7' xaxisangle='1' title='area test #12' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box'
   * Set areaTest13 = name='areaTest13' type='area' data='R2:C7..R999:C7' xaxisangle='1' title='area test #13' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box' legend='R1:C7..R1:C7'
   * Set areaTest14 = name='areaTest14' type='area' data='R2:C4..R999:C7' xaxisangle='1' title='area test #14' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box' legend='R1:C4..R1:C7'
   * Set areaTest15 = name='areaTest15' type='area' data='R2:C4..R999:C7' xaxisangle='1' title='area test #15' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box' legend='R1:C4..R1:C7' colors='#ffAAAA,#AAffAA,#AAAAff,#AAAAAA'
   * Set areaTest15b = name='areaTest15b' type='area' data='R2:C4..R999:C7' xaxisangle='1' title='area test #15' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box' legend='R1:C4..R1:C7' colors='transparent,#AAffAA,#AAAAff,#AAAAAA'
   * Set areaTest16 = name='areaTest16' type='area' data='R2:C4..R999:C7' xaxisangle='1' title='area test #16' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7'
   * Set areaTest17 = name='areaTest17' type='area' data='R2:C4..R999:C7' xaxisangle='1' title='area test #17' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' bgcolor='#AAAAAA'
   * Set areaTest18 = name='areaTest18' type='area' data='R2:C4..R999:C7' xaxisangle='1' title='area test #18' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' bgcolor='#FFFFFF #EEEEEE'
   * Set areaTest19 = name='areaTest19' type='area' data='R2:C4..R999:C7' xaxisangle='1' title='area test #19' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' bgcolor='#EEEEEE #EEFFEE'
   * Set areaTest20 = name='areaTest20' type='area' data='R2:C4..R999:C7' xaxisangle='1' title='area test #20' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='on'
   * Set areaTest21 = name='areaTest21' type='area' data='R2:C4..R999:C7' xaxisangle='1' title='area test #21' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off'
   * Set areaTest22 = name='areaTest22' type='area' data='R2:C4..R999:C7' xaxisangle='1' title='area test #22' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off' xgrid='on'
   * Set areaTest23 = name='areaTest23' type='area' data='R2:C4..R999:C7' xaxisangle='1' title='area test #23' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off' xgrid='off'
   * Set areaTest24 = name='areaTest24' type='area' data='R2:C4..R999:C7' xaxisangle='1' title='area test #24' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off' xgrid='off' width='450'
   * Set areaTest25 = name='areaTest25' type='area' data='R2:C4..R999:C7' xaxisangle='1' title='area test #25' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off' xgrid='off' width='450' height='150'
   * Set areaTest26 = name='areaTest26' type='area' topic='ChartPluginTestsRemote' table='2' data='R4:C2..R7:C7' xaxisangle='1' title='area test #26' xaxis='R2:C2..R2:C7' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R4:C1..R7:C1' ygrid='off' xgrid='off'
   * Set areaTest27 = name='areaTest27' type='area' topic='ChartPluginTestsRemote' table='2' data='R4:C2..R8:C7' xaxisangle='1' title='area test #27' xaxis='R2:C2..R2:C7' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R4:C1..R8:C1' ygrid='off' xgrid='off'
   * Set areaTest28 = name='areaTest28' type='area' topic='ChartPluginTestsRemote' table='2' data='R4:C2..R8:C7' xaxisangle='1' title='New Title: area test #28' xaxis='R2:C2..R2:C7' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R4:C1..R8:C1' ygrid='off' xgrid='off' alt='This is the alt tag'

-----------------------------------------------------------
-- Define the bar tests
-----------------------------------------------------------
   * Set barTest01 = name='barTest01' type='bar' data='R2:C7..R999:C7' xaxisangle='1' ygrid='off'
   * Set barTest02 = name='barTest02' type='bar' data='R2:C7..R999:C7' xaxisangle='1' ygrid='off' title='bar test #02'
   * Set barTest03 = name='barTest03' type='bar' data='R2:C7..R999:C7' xaxisangle='1' ygrid='off' title='bar test #03' xaxis='R2:C2..R7:C2'
   * Set barTest04 = name='barTest04' type='bar' data='R2:C7..R999:C7' xaxisangle='1' ygrid='off' title='bar test #04' xaxis='R2:C2..R7:C2' yaxis='on'
   * Set barTest05 = name='barTest05' type='bar' data='R2:C7..R999:C7' xaxisangle='1' ygrid='off' title='bar test #05' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0'
   * Set barTest06 = name='barTest06' type='bar' data='R2:C7..R999:C7' xaxisangle='1' ygrid='off' title='bar test #06' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ymax='150'
   * Set barTest07 = name='barTest07' type='bar' data='R2:C7..R999:C7' xaxisangle='1' ygrid='off' title='bar test #07' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ymax='150' ylabel='Hello there'
   * Set barTest08 = name='barTest08' type='bar' data='R2:C7..R999:C7' xaxisangle='1' title='bar test #08' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ymax='150' ylabel='Hello there' numygrids='5'
   * Set barTest09 = name='barTest09' type='bar' data='R2:C7..R999:C7' xaxisangle='1' title='bar test #09' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ymax='150' ylabel='Hello there' numygrids='2'
   * Set barTest10 = name='barTest10' type='bar' data='R2:C7..R999:C7' xaxisangle='1' title='bar test #10' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label'
   * Set barTest11 = name='barTest11' type='bar' data='R2:C7..R999:C7' xaxisangle='1' title='bar test #11' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='on'
   * Set barTest12 = name='barTest12' type='bar' data='R2:C7..R999:C7' xaxisangle='1' title='bar test #12' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box'
   * Set barTest13 = name='barTest13' type='bar' data='R2:C7..R999:C7' xaxisangle='1' title='bar test #13' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box' legend='R1:C7..R1:C7'
   * Set barTest14 = name='barTest14' type='bar' data='R2:C4..R999:C7' xaxisangle='1' title='bar test #14' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box' legend='R1:C4..R1:C7'
   * Set barTest15 = name='barTest15' type='bar' data='R2:C4..R999:C7' xaxisangle='1' title='bar test #15' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box' legend='R1:C4..R1:C7' colors='#ffAAAA,#AAffAA,#AAAAff,#AAAAAA'
   * Set barTest15b = name='barTest15b' type='bar' data='R2:C4..R999:C7' xaxisangle='1' title='bar test #15b' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box' legend='R1:C4..R1:C7' colors='transparent,#AAffAA,#AAAAff,#AAAAAA'
   * Set barTest16 = name='barTest16' type='bar' data='R2:C4..R999:C7' xaxisangle='1' title='bar test #16' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7'
   * Set barTest17 = name='barTest17' type='bar' data='R2:C4..R999:C7' xaxisangle='1' title='bar test #17' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' bgcolor='#AAAAAA'
   * Set barTest18 = name='barTest18' type='bar' data='R2:C4..R999:C7' xaxisangle='1' title='bar test #18' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' bgcolor='#FFFFFF #EEEEEE'
   * Set barTest19 = name='barTest19' type='bar' data='R2:C4..R999:C7' xaxisangle='1' title='bar test #19' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' bgcolor='#EEEEEE #EEFFEE'
   * Set barTest20 = name='barTest20' type='bar' data='R2:C4..R999:C7' xaxisangle='1' title='bar test #20' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='on'
   * Set barTest21 = name='barTest21' type='bar' data='R2:C4..R999:C7' xaxisangle='1' title='bar test #21' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off'
   * Set barTest22 = name='barTest22' type='bar' data='R2:C4..R999:C7' xaxisangle='1' title='bar test #22' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off' xgrid='on'
   * Set barTest23 = name='barTest23' type='bar' data='R2:C4..R999:C7' xaxisangle='1' title='bar test #23' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off' xgrid='off'
   * Set barTest24 = name='barTest24' type='bar' data='R2:C4..R999:C7' xaxisangle='1' title='bar test #24' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off' xgrid='off' width='450'
   * Set barTest25 = name='barTest25' type='bar' data='R2:C4..R999:C7' xaxisangle='1' title='bar test #25' xaxis='R2:C2..R7:C2' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R1:C4..R1:C7' ygrid='off' xgrid='off' width='450' height='150'
   * Set barTest26 = name='barTest26' type='bar' topic='ChartPluginTestsRemote' table='2' data='R4:C2..R7:C7' xaxisangle='1' title='bar test #26' xaxis='R2:C2..R2:C7' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R4:C1..R7:C1' ygrid='off' xgrid='off'
   * Set barTest27 = name='barTest27' type='bar' topic='ChartPluginTestsRemote' table='2' data='R4:C2..R8:C7' xaxisangle='1' title='bar test #27' xaxis='R2:C2..R2:C7' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R4:C1..R8:C1' ygrid='off' xgrid='off'
   * Set barTest28 = name='barTest28' type='bar' topic='ChartPluginTestsRemote' table='2' data='R4:C2..R8:C7' xaxisangle='1' title='New Title: bar test #28' xaxis='R2:C2..R2:C7' yaxis='on' ymin='0' ylabel='Hello there' xlabel='Yep, an X label' datalabel='off off on box' legend='R4:C1..R8:C1' ygrid='off' xgrid='off' alt='This is the alt tag'

-----------------------------------------------------------
-- Define the combo tests
-----------------------------------------------------------
   * Set comboTest01 = name='comboTest01' type='combo' table='2' data='R7:C2..R7:C7' xaxis='R2:C2..R2:C7' ygrid='off' xgrid='off' width='500'
   * Set comboTest02 = name='comboTest02' type='combo' table='2' data='R4:C2..R7:C7' xaxis='R2:C2..R2:C7' ygrid='off' xgrid='off' title='combo test #02' width='500'
   * Set comboTest03 = name='comboTest03' type='combo' table='2' data='R4:C2..R7:C7' xaxis='R2:C2..R2:C7' yaxis='on' title='combo test #03' width='500' xlabel='Yep, an X label' ylabel='Hello there' legend='R4:C1..R7:C1'
   * Set comboTest04 = name='comboTest04' type='combo' subtype='area' table='2' data='R4:C2..R7:C7' xaxis='R2:C2..R2:C7' yaxis='on' title='combo test #04' width='500' xlabel='Yep, an X label' ylabel='Hello there' legend='R4:C1..R7:C1'
   * Set comboTest05 = name='comboTest05' type='combo' subtype='line' table='2' data='R4:C2..R7:C7' xaxis='R2:C2..R2:C7' yaxis='on' title='combo test #05' width='500' xlabel='Yep, an X label' ylabel='Hello there' legend='R4:C1..R7:C1'
   * Set comboTest06 = name='comboTest06' type='combo' subtype='bar' table='2' data='R4:C2..R7:C7' xaxis='R2:C2..R2:C7' yaxis='on' title='combo test #06' width='500' xlabel='Yep, an X label' ylabel='Hello there' legend='R4:C1..R7:C1'
   * Set comboTest07 = name='comboTest07' type='combo' subtype='pline' table='2' data='R4:C2..R7:C7' xaxis='R2:C2..R2:C7' yaxis='on' title='combo test #07' width='500' xlabel='Yep, an X label' ylabel='Hello there' legend='R4:C1..R7:C1'
   * Set comboTest08 = name='comboTest08' type='combo' subtype='point' table='2' data='R4:C2..R7:C7' xaxis='R2:C2..R2:C7' yaxis='on' title='combo test #08' width='500' xlabel='Yep, an X label' ylabel='Hello there' legend='R4:C1..R7:C1'
   * Set comboTest09 = name='comboTest09' type='combo' subtype='area line pline point' table='2' data='R4:C2..R7:C7' xaxis='R2:C2..R2:C7' yaxis='on' title='combo test #09' width='500' xlabel='Yep, an X label' ylabel='Hello there' legend='R4:C1..R7:C1'
   * Set comboTest10 = name='comboTest10' type='combo' subtype='line pline point area' table='2' data='R4:C2..R7:C7' xaxis='R2:C2..R2:C7' yaxis='on' title='combo test #10' width='500' xlabel='Yep, an X label' ylabel='Hello there' legend='R4:C1..R7:C1'
   * Set comboTest11 = name='comboTest11' type='combo' subtype='pline pline point bar' table='2' data='R4:C2..R7:C7' xaxis='R2:C2..R2:C7' yaxis='on' title='combo test #11' width='500' xlabel='Yep, an X label' ylabel='Hello there' legend='R4:C1..R7:C1'

-----------------------------------------------------------
-- Define the scatter tests
-----------------------------------------------------------
   * Set scatterTest01 = name='scatterTest01' type='scatter' table='3' data='R2:C2..R99:C99' xaxis='R2:C1..R99:C1' xgrid='off' width='500'
   * Set scatterTest02 = name='scatterTest02' type='scatter' table='3' data='R2:C2..R99:C99' xaxis='R2:C1..R99:C1' title='scatter test #02' xlabel='Yep, an X label' legend='R1:C2..R1:C99' yaxis='on' ygrid='on' ymin='0' xgrid='on' width='500'
   * Set scatterTest03 = name='scatterTest03' type='scatter' subtype='line' table='3' data='R2:C2..R99:C99' xaxis='R2:C1..R99:C1' title='scatter test #03' xlabel='Yep, an X label' legend='R1:C2..R1:C99' yaxis='on' ygrid='on' ymin='0' xgrid='on' width='500'
   * Set scatterTest04 = name='scatterTest04' type='scatter' subtype='pline' table='3' data='R2:C2..R99:C99' xaxis='R2:C1..R99:C1' title='scatter test #04' xlabel='Yep, an X label' legend='R1:C2..R1:C99' yaxis='on' ygrid='on' ymin='0' xgrid='on' width='500' datalabel='on'
   * Set scatterTest05 = name='scatterTest05' type='scatter' subtype='point' table='3' data='R2:C2..R99:C99' xaxis='R2:C1..R99:C1' title='scatter test #05' xlabel='Yep, an X label' legend='R1:C2..R1:C99' yaxis='on' ygrid='on' ymin='0' xgrid='on' width='500'
   * Set scatterTest06 = name='scatterTest06' type='scatter' subtype='bar' table='3' data='R2:C2..R99:C99' xaxis='R2:C1..R99:C1' title='scatter test #06' xlabel='Yep, an X label' legend='R1:C2..R1:C99' yaxis='on' ygrid='on' ymin='0' xgrid='on' width='500'
   * Set scatterTest07 = name='scatterTest07' type='scatter' subtype='point bar line pline' table='3' data='R2:C2..R99:C99' xaxis='R2:C1..R99:C1' title='scatter test #07' xlabel='Yep, an X label' legend='R1:C2..R1:C99' yaxis='on' ygrid='on' ymin='0' xgrid='on' width='500'
   * Set scatterTest08 = name='scatterTest08' type='scatter' subtype='bar line pline point' table='3' data='R2:C2..R99:C99' xaxis='R2:C1..R99:C1' title='scatter test #08' xlabel='Yep, an X label' legend='R1:C2..R1:C99' yaxis='on' ygrid='on' ymin='0' xgrid='on' width='500'
   * Set scatterTest09 = name='scatterTest09' type='scatter' subtype='line pline point bar' table='3' data='R2:C2..R99:C99' xaxis='R2:C1..R99:C1' title='scatter test #09' xlabel='Yep, an X label' legend='R1:C2..R1:C99' yaxis='on' ygrid='on' ymin='0' xgrid='on' width='500'
   * Set scatterTest10 = name='scatterTest10' type='scatter' subtype='pline point bar line' table='3' data='R2:C2..R99:C99' xaxis='R2:C1..R99:C1' title='scatter test #10' xlabel='Yep, an X label' legend='R1:C2..R1:C99' yaxis='on' ygrid='on' ymin='0' xgrid='on' width='500'
   * Set scatterTest11 = name='scatterTest11' type='scatter' subtype='bar bar bar pline' table='3' data='R2:C2..R99:C99' xaxis='R2:C1..R99:C1' title='scatter test #11' xlabel='Yep, an X label' legend='R1:C2..R1:C99' yaxis='on' ygrid='on' ymin='0' xgrid='on' width='500'
   * Set scatterTest12 = name='scatterTest12' type='scatter' subtype='bar bar bar pline' table='3' data='R5:C2..R99:C99' xaxis='R5:C1..R99:C1' title='scatter test #12' xlabel='Yep, an X label' legend='R1:C2..R1:C99' yaxis='on' ygrid='on' ymin='0' xgrid='on' width='500'
   * Set scatterTest13 = name='scatterTest13' type='scatter' subtype='bar bar bar pline' table='3' data='R8:C2..R99:C99' xaxis='R8:C1..R99:C1' title='scatter test #13' xlabel='Yep, an X label' legend='R1:C2..R1:C99' yaxis='on' ygrid='on' ymin='0' xgrid='on' width='500'

-----------------------------------------------------------
-- Define the spark tests
-----------------------------------------------------------
   * Set sparkData1 = 88, 84, 82, 92, 82, 86, 66, 82, 44, 64, 66, 88, 96, 80, 24, 26, 14, 0, 0, 26, 8, 6, 6, 24, 52, 66, 36, 6, 10, 14, 30
   * Set sparkData2 = 88, 84, 82, 92, 82, 86, 66, 82, 44, 64, 66, 88, 96, 80, 24, 26, 14, 0, 0, 26, 8, 6, 6, 24, 52, 66, 36, 6, 10, 14, 30, 88, 84, 82, 92, 82, 86, 66, 82, 44, 64, 66, 88, 96, 80, 24, 26, 14, 0, 0, 26, 8, 6, 6, 24, 52, 66, 36, 6, 10, 14, 30
   * Set sparkTest01 = name='sparkTest01' type='sparkline' table='1' data='R2:C7..R7:C7' width='100' height='16' bgcolor='#EEEEEE'
   * Set sparkTest02 = name='sparkTest02' type='sparkbar' table='1' data='R2:C7..R7:C7' width='100' height='16' bgcolor='#EEEEEE'
   * Set sparkTest03 = name='sparkTest03' type='sparkarea' table='1' data='R2:C7..R7:C7' width='100' height='16' bgcolor='#EEEEEE'
   * Set sparkTest04 = name='sparkTest04' type='sparkline' data='%sparkData1%' width='100' height='16' bgcolor='#EEEEEE'
   * Set sparkTest05 = name='sparkTest05' type='sparkbar' data='%sparkData1%' width='100' height='16' bgcolor='#EEEEEE'
   * Set sparkTest06 = name='sparkTest06' type='sparkarea' data='%sparkData1%' width='100' height='16' bgcolor='#EEEEEE'
   * Set sparkTest07 = name='sparkTest07' type='sparkline' data='%sparkData2%' width='100' height='16' bgcolor='#EEEEEE'
   * Set sparkTest08 = name='sparkTest08' type='sparkbar' data='%sparkData2%' width='100' height='16' bgcolor='#EEEEEE'
   * Set sparkTest09 = name='sparkTest09' type='sparkbar' data='%sparkData2%' width='0' height='16' bgcolor='#EEEEEE'
   * Set sparkTest10 = name='sparkTest10' type='sparkarea' data='%sparkData2%' width='100' height='16' bgcolor='#EEEEEE'

-----------------------------------------------------------
-- Define the legend placement tests
-----------------------------------------------------------
   * Set legendTest01 = name='legendTest01' table='4' data='R2:C2..R3:C5' xaxis='R2:C1..R9:C1' title='legend test #01' legend='R1:C2..R1:C5' yaxis='on' ygrid='off'
   * Set legendTest02 = name='legendTest02' table='4' data='R2:C2..R5:C5' xaxis='R2:C1..R9:C1' title='legend test #02' legend='R1:C2..R1:C5' yaxis='on' ygrid='off'
   * Set legendTest03 = name='legendTest03' table='4' data='R2:C2..R6:C5' xaxis='R2:C1..R9:C1' title='legend test #03' legend='R1:C2..R1:C5' yaxis='on' ygrid='off'
   * Set legendTest04 = name='legendTest04' table='4' data='R2:C2..R7:C5' xaxis='R2:C1..R9:C1' title='legend test #04' legend='R1:C2..R1:C5' yaxis='on' ygrid='off' ymax='40'
   * Set legendTest05 = name='legendTest05' table='4' data='R2:C2..R8:C5' xaxis='R2:C1..R9:C1' title='legend test #05' legend='R1:C2..R1:C5' yaxis='on' ygrid='off' ymax='40'
   * Set legendTest06 = name='legendTest06' table='4' data='R2:C2..R9:C5' xaxis='R2:C1..R9:C1' title='legend test #06' legend='R1:C2..R1:C5' yaxis='on' ygrid='off' ymax='40'
   * Set legendTest07 = name='legendTest07' table='4' data='R2:C2..R4:C5' xaxis='R2:C1..R9:C1' title='legend test #07' legend='R1:C2..R1:C5' yaxis='on' ygrid='off' ymax='20'
   * Set legendTest08 = name='legendTest08' table='4' data='R2:C2..R4:C5' xaxis='R2:C1..R9:C1' title='legend test #08' legend='R1:C2..R1:C5' yaxis='on' ygrid='off' ymin='21'
   * Set legendTest09 = name='legendTest09' table='4' data='R2:C2..R4:C5' xaxis='R2:C1..R9:C1' title='legend test #09' legend='R1:C2..R1:C5' yaxis='on' ygrid='off' ymin='50' ymax='60'
   * Set legendTest10 = name='legendTest10' table='4' data='R2:C2..R4:C5' xaxis='R2:C1..R9:C1' title='legend test #10' legend='R1:C2..R1:C5' yaxis='on' ygrid='off' ymin='-50' ymax='-10'

-----------------------------------------------------------
-- Define the grid tests
-----------------------------------------------------------
   * Set gridTest01 = name='gridTest01' table='4' data='R2:C2..R99:C5' xaxis='R2:C1..R99:C1' title='grid test #01' legend='R1:C2..R1:C5' width='200' yaxis='on'
   * Set gridTest02 = name='gridTest02' table='4' data='R2:C2..R99:C5' xaxis='R2:C1..R99:C1' title='grid test #02' legend='R1:C2..R1:C5' width='200' yaxis='on' numxgrids='3'
   * Set gridTest03 = name='gridTest03' table='4' data='R2:C2..R99:C5' xaxis='R2:C1..R99:C1' title='grid test #03' legend='R1:C2..R1:C5' width='200' yaxis='on' xaxisangle='90'

-----------------------------------------------------------
-- Define the semilog tests
-----------------------------------------------------------
   * Set semilogTest01 = name='semilogTest01' scale='semilog' table='4' data='R2:C8..R99:C8' xaxis='R2:C1..R99:C1' title='semilog test #01' legend='R1:C8..R1:C8' yaxis='on' datalabel='on'
   * Set semilogTest02 = name='semilogTest02' scale='semilog' table='4' data='R2:C8..R99:C8' xaxis='R2:C1..R99:C1' title='semilog test #02' legend='R1:C8..R1:C8' yaxis='on' ytics='4' datalabel='on'
   * Set semilogTest03 = name='semilogTest03' scale='semilog' table='4' data='R4:C8..R6:C8' xaxis='R4:C1..R99:C1' title='semilog test #03' legend='R1:C8..R1:C8' yaxis='on' datalabel='on'
   * Set semilogTest04 = name='semilogTest04' table='4' data='R2:C8..R99:C8' xaxis='R2:C1..R99:C1' title='semilog test #04' legend='R1:C8..R1:C8' yaxis='on' ytics='1' datalabel='on'

-----------------------------------------------------------
-- Define the default data tests
-----------------------------------------------------------
   * Set defaultsTest01 = name='defaultsTest01' table='4' data='R2:C6..R99:C7' xaxis='R2:C1..R99:C1' title='defaults test #01' legend='R1:C6..R1:C7' yaxis='on'
   * Set defaultsTest02 = name='defaultsTest02' table='4' data='R2:C6..R99:C7' xaxis='R2:C1..R99:C1' title='defaults test #02' legend='R1:C6..R1:C7' yaxis='on' defaultdata='0'
   * Set defaultsTest03 = name='defaultsTest03' table='4' data='R2:C6..R99:C7' xaxis='R2:C1..R99:C1' title='defaults test #03' legend='R1:C6..R1:C7' yaxis='on' defaultdata='10'

-----------------------------------------------------------
-- Define the grid color tests
-----------------------------------------------------------
   * Set colorTest01 = name='colorTest01' table='table1' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='grid color test #01' xgrid='on' ygrid='on'
   * Set colorTest02 = name='colorTest02' table='table1' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='grid color test #02' xgrid='on' ygrid='on' gridcolor='#0000FF'
   * Set colorTest03 = name='colorTest03' table='table1' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='grid color test #03' xgrid='on' ygrid='dot' xgrid='dot'
   * Set colorTest04 = name='colorTest04' table='table1' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='grid color test #04' xgrid='on' ygrid='on' gridcolor='#000000, #000000, #000000, #000000, #000000, transparent, transparent, transparent, transparent, transparent' ygrid='dot' xgrid='dot'
   * Set colorTest05 = name='colorTest05' table='table1' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='grid color test #05' xgrid='on' ygrid='on' gridcolor='#FF0000, #FF0000, #FF0000, #FF0000, #00FF00, #00FF00, #00FF00, #00FF00, #0000FF, #0000FF, #0000FF, #0000FF, transparent, transparent, transparent, transparent' ygrid='dot' xgrid='dot'
   * Set colorTest06 = name='colorTest06' table='table1' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='grid color test #06' xgrid='on' ygrid='on' gridcolor='#000000' ygrid='dot' xgrid='dot'
   * Set colorTest07 = name='colorTest07' table='table1' data='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='grid color test #07' xgrid='on' ygrid='on' gridcolor='transparent'

-----------------------------------------------------------
-- Define some reversed data ranges along with multiple data ranges.
-----------------------------------------------------------
   * Set multiLineTest01f = name='multiLineTest01f' topic='WebStatistics' type='line' data='R3:C2..R99:C2' xaxis='R3:C1..R99:C1' yaxis='on' xaxisangle='90' datalabel='on' title='Forward data multiLineTest01f'
   * Set multiLineTest01b = name='multiLineTest01b' topic='WebStatistics' type='line' data='R99:C2..R3:C2' xaxis='R99:C1..R3:C1' yaxis='on' xaxisangle='90' datalabel='on' title='Backward data multiLineTest01b'

   * Set multiLineTest02f = name='multiLineTest02f' table='table1' type='line' data='R2:C4..R99:C4' xaxis='R2:C2..R99:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Forward data multiLineTest02f' legend='R1:C4..R1:C4'
   * Set multiLineTest02b = name='multiLineTest02b' table='table1' type='line' data='R99:C4..R2:C4' xaxis='R99:C2..R2:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Backward data multiLineTest02b' legend='R1:C4..R1:C4'

   * Set multiLineTest03f = name='multiLineTest03f' table='table1' type='line' data='R2:C4..R99:C7' xaxis='R2:C2..R99:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Forward data multiLineTest03f' legend='R1:C4..R1:C7'
   * Set multiLineTest03b = name='multiLineTest03b' table='table1' type='line' data='R99:C4..R2:C7' xaxis='R99:C2..R2:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Backward data multiLineTest03b' legend='R1:C4..R1:C7'

   * Set multiLineTest04f = name='multiLineTest04f' table='table1' type='line' data='R2:C7..R99:C4' xaxis='R2:C2..R99:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Forward data multiLineTest04f' legend='R1:C7..R1:C4'
   * Set multiLineTest04b = name='multiLineTest04b' table='table1' type='line' data='R99:C7..R2:C4' xaxis='R99:C2..R2:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Backward data multiLineTest04b' legend='R1:C7..R1:C4'

   * Set multiLineTest05f = name='multiLineTest05f' table='table1' type='line' data='R2:C4..R99:C4,R2:C5..R99:C5,R2:C6..R99:C6,R2:C7..R99:C7' xaxis='R2:C2..R99:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Forward data multiLineTest05f' legend='R1:C4..R1:C4,R1:C5..R1:C5,R1:C6..R1:C6,R1:C7..R1:C7'
   * Set multiLineTest05b = name='multiLineTest05b' table='table1' type='line' data='R99:C4..R2:C4,R99:C5..R2:C5,R99:C6..R2:C6,R99:C7..R2:C7' xaxis='R99:C2..R2:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Backward data multiLineTest05b' legend='R1:C4..R1:C4,R1:C5..R1:C5,R1:C6..R1:C6,R1:C7..R1:C7'

   * Set multiLineTest06f = name='multiLineTest06f' table='table1' type='line' data='R2:C5..R99:C5,R2:C4..R99:C4,R2:C6..R99:C6,R2:C7..R99:C7' xaxis='R2:C2..R99:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Forward data multiLineTest06f' legend='R1:C5,R1:C4,R1:C6,R1:C7'
   * Set multiLineTest06b = name='multiLineTest06b' table='table1' type='line' data='R99:C5..R2:C5,R99:C4..R2:C4,R99:C6..R2:C6,R99:C7..R2:C7' xaxis='R99:C2..R2:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Backward data multiLineTest06b' legend='R1:C5,R1:C4,R1:C6,R1:C7'

   * Set multiLineTest07f = name='multiLineTest07f' table='table1' type='line' data='R2:C5..R99:C7,R2:C4..R99:C4' xaxis='R2:C2..R99:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Forward data multiLineTest07f' legend='R1:C5..R1:C7,R1:C4'
   * Set multiLineTest07b = name='multiLineTest07b' table='table1' type='line' data='R99:C5..R2:C7,R99:C4..R2:C4' xaxis='R99:C2..R2:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Backward data multiLineTest07b' legend='R1:C5..R1:C7,R1:C4'

   * Set multiAreaTest01f = name='multiAreaTest01f' table='table1' type='area' data='R2:C4..R99:C7' xaxis='R2:C2..R99:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Forward data multiAreaTest01f' legend='R1:C4..R1:C7'
   * Set multiLineTest08b = name='multiLineTest08b' table='table1' type='area' data='R99:C7..R2:C4' xaxis='R99:C2..R2:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Backward data multiLineTest08b' legend='R1:C7..R1:C4'

-----------------------------------------------------------
-- Define some reversed data ranges along with multiple data data ranges.  These
-- tests use data from table2 where the data is flipped along the diagonal.
-----------------------------------------------------------
   * Set flippedMultiLineTest01f = name='flippedMultiLineTest01f' table='table2' type='line' data='R4:C2..R4:C99' xaxis='R2:C2..R2:C99' yaxis='on' xaxisangle='90' datalabel='on' title='Forward data flippedMultiLineTest01f' legend='R4:C1'
   * Set flippedMultiLineTest01b = name='flippedMultiLineTest01b' table='table2' type='line' data='R4:C99..R4:C2' xaxis='R2:C99..R2:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Backward data flippedMultiLineTest01b' legend='R4:C1'

   * Set flippedMultiLineTest03f = name='flippedMultiLineTest03f' table='table2' type='line' data='R4:C2..R7:C99' xaxis='R2:C2..R2:C99' yaxis='on' xaxisangle='90' datalabel='on' title='Forward data flippedMultiLineTest03f' legend='R4:C1..R7:C1'
   * Set flippedMultiLineTest03b = name='flippedMultiLineTest03b' table='table2' type='line' data='R4:C99..R7:C2' xaxis='R2:C99..R2:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Backward data flippedMultiLineTest03b' legend='R4:C1..R7:C1'

   * Set flippedMultiLineTest04f = name='flippedMultiLineTest04f' table='table2' type='line' data='R4:C2..R4:C99,R5:C2..R5:C99,R6:C2..R6:C99,R7:C2..R7:C99' xaxis='R2:C2..R2:C99' yaxis='on' xaxisangle='90' datalabel='on' title='Forward data flippedMultiLineTest04f' legend='R4:C1,R5:C1,R6:C1,R7:C1'
   * Set flippedMultiLineTest04b = name='flippedMultiLineTest04b' table='table2' type='line' data='R7:C99..R7:C2,R6:C99..R6:C2,R5:C99..R5:C2,R4:C99..R4:C2' xaxis='R2:C99..R2:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Backward data flippedMultiLineTest04b' legend='R7:C1,R6:C1,R5:C1,R4:C1'

   * Set flippedMultiLineTest05f = name='flippedMultiLineTest05f' table='table2' type='line' data='R5:C2..R5:C99,R4:C2..R4:C99,R6:C2..R6:C99,R7:C2..R7:C99' xaxis='R2:C2..R2:C99' yaxis='on' xaxisangle='90' datalabel='on' title='Forward data flippedMultiLineTest05f' legend='R5:C1,R4:C1,R6:C1,R7:C1'
   * Set flippedMultiLineTest05b = name='flippedMultiLineTest05b' table='table2' type='line' data='R5:C99..R5:C2,R4:C99..R4:C2,R6:C99..R6:C2,R7:C99..R7:C2' xaxis='R2:C99..R2:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Backward data flippedMultiLineTest05b' legend='R5:C1,R4:C1,R6:C1,R7:C1'

   * Set flippedMultiLineTest06f = name='flippedMultiLineTest06f' table='table2' type='line' data='R5:C2..R7:C99,R4:C2..R4:C99' xaxis='R2:C2..R2:C99' yaxis='on' xaxisangle='90' datalabel='on' title='Forward data flippedMultiLineTest06f' legend='R5:C1..R7:C1,R4:C1'
   * Set flippedMultiLineTest06b = name='flippedMultiLineTest06b' table='table2' type='line' data='R5:C99..R7:C2,R4:C99..R4:C2' xaxis='R2:C99..R2:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Backward data flippedMultiLineTest06b' legend='R5:C1..R7:C1,R4:C1'

   * Set flippedMultiAreaTest01f = name='flippedMultiAreaTest01f' table='table2' type='area' data='R4:C2..R7:C99' xaxis='R2:C2..R2:C99' yaxis='on' xaxisangle='90' datalabel='on' title='Forward data flippedMultiAreaTest01f' legend='R4:C1..R7:C1'
   * Set flippedMultiAreaTest01b = name='flippedMultiAreaTest01b' table='table2' type='area' data='R7:C99..R4:C2' xaxis='R2:C99..R2:C2' yaxis='on' xaxisangle='90' datalabel='on' title='Backward data flippedMultiAreaTest01b' legend='R7:C1..R4:C1'

-----------------------------------------------------------
-- Define the multi axis data tests.
-----------------------------------------------------------
   * Set multiDataTest01 = name="multiDataTest01" type='line' table='table6' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='Single data MultiTest01: Only left axis' yaxis='on' ylabel='Left Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymax='10'
   * Set multiDataTest02 = name="multiDataTest02" type='line' table='table6' data='R2:C4..R7:C6' data2='R2:C7..R7:C7' xaxis='R2:C2..R7:C2' title='Multidata Test02: Left and right axis' yaxis='on' yaxis2='on' ylabel='Left Y-axis label' ylabel2='Right Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymin2='0' ymax='10' ymax2='10'
   * Set multiDataTest03 = name="multiDataTest03" type='line' table='table6' data='R2:C4..R7:C4' data2='R2:C5..R7:C7' xaxis='R2:C2..R7:C2' title='Multidata Test03: Left and right axis' yaxis='on' yaxis2='on' ylabel='Left Y-axis label' ylabel2='Right Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymax='10' ymin2='0' ymax2='10'
   * Set multiDataTest04 = name="multiDataTest04" type='line' table='table6' data='R2:C4..R7:C5' data2='R2:C6..R7:C7' xaxis='R2:C2..R7:C2' title='Multidata Test04: Left and right axis' yaxis='on' yaxis2='on' ylabel='Left Y-axis label' ylabel2='Right Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymax='10' ymin2='0' ymax2='30'
   * Set multiDataTest05 = name="multiDataTest05" type='line' table='table6' data='R2:C4..R7:C5' data2='R2:C6..R7:C7' xaxis='R2:C2..R7:C2' title='Multidata Test05: Left and right axis' yaxis='on' ylabel='Left Y-axis label' ylabel2='Right Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymax='10' ymin2='0' ymax2='30'
   * Set multiDataTest06 = name="multiDataTest06" type='line' table='table6' data='R2:C4..R7:C5' data2='R2:C6..R7:C7' xaxis='R2:C2..R7:C2' title='Multidata Test06: Left and right axis' yaxis='on' yaxis2='on' ylabel='Left Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymax='10' ymin2='0' ymax2='30'
   * Set multiDataTest07 = name="multiDataTest07" type='line' table='table6' data='R2:C4..R7:C5' data2='R2:C6..R7:C7' xaxis='R2:C2..R7:C2' title='Multidata Test07: Left and right axis' yaxis='on' yaxis2='on' ylabel='Left Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymax='10' ymin2='0' ymax2='30' ytics='1' ytics2='3'
   * Set multiDataTest08 = name="multiDataTest08" type='area' table='table6' data='R2:C4..R7:C5' data2='R2:C6..R7:C7' xaxis='R2:C2..R7:C2' title='Multidata Test08: Left and right axis' yaxis='on' yaxis2='on' ylabel='Left Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymax='10' ymin2='0' ymax2='30' ytics='1' ytics2='3'
   * Set multiDataTest09 = name="multiDataTest09" type='combo' subtype='area, area' table='table6' data='R2:C4..R7:C5' data2='R2:C6..R7:C7' xaxis='R2:C2..R7:C2' title='Multidata Test09: Left and right axis' yaxis='on' yaxis2='on' ylabel='Left Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymax='10' ymin2='0' ymax2='30' ytics='1' ytics2='3'
   * Set multiDataTest10 = name="multiDataTest10" type='combo' subtype='area, area' subtype2='area, area' table='table6' data='R2:C4..R7:C5' data2='R2:C6..R7:C7' xaxis='R2:C2..R7:C2' title='Multidata Test10: Left and right axis' yaxis='on' yaxis2='on' ylabel='Left Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymax='10' ymin2='-5' ymax2='10' ytics='1' ytics2='3'
   * Set multiDataTest11 = name="multiDataTest11" type='combo' subtype='bar, bar' subtype2='bar, bar' table='table6' data='R2:C4..R7:C5' data2='R2:C6..R7:C7' xaxis='R2:C2..R7:C2' title='Multidata Test11: Left and right axis' yaxis='on' yaxis2='on' ylabel='Left Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymax='10' ymin2='-5' ymax2='10' ytics='1' ytics2='3'
   * Set multiDataTest12 = name="multiDataTest12" type='combo' subtype='pline, pline' subtype2='pline, pline' table='table6' data='R2:C4..R7:C5' data2='R2:C6..R7:C7' xaxis='R2:C2..R7:C2' title='Multidata Test12: Left and right axis' yaxis='on' yaxis2='on' ylabel='Left Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymax='10' ymin2='-5' ymax2='10' ytics='1' ytics2='3'
   * Set multiDataTest13 = name="multiDataTest13" type='combo' subtype='line, point' subtype2='pline, bar' table='table6' data='R2:C4..R7:C5' data2='R2:C6..R7:C7' xaxis='R2:C2..R7:C2' title='Multidata Test13: Left and right axis' yaxis='on' yaxis2='on' ylabel='Left Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymax='10' ymin2='-5' ymax2='10' ytics='1' ytics2='3'
   * Set multiDataTest14 = name="multiDataTest14" type='combo' subtype='line, bar' subtype2='pline, bar' table='table6' data='R2:C4..R7:C5' data2='R2:C6..R7:C7' xaxis='R2:C2..R7:C2' title='Multidata Test14: Left and right axis' yaxis='on' yaxis2='on' ylabel='Left Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymax='10' ymin2='-5' ymax2='10' ytics='1' ytics2='3'
   * Set multiDataTest15 = name="multiDataTest15" type='scatter' subtype='line, bar' subtype2='pline, bar' table='table6' data='R2:C4..R7:C5' data2='R2:C6..R7:C7' xaxis='R2:C1..R7:C1' title='Multidata Test15: Left and right axis' yaxis='on' yaxis2='on' ylabel='Left Y-axis label' legend='R1:C4..R1:C7' ymin='0' ymax='10' ymin2='-5' ymax2='10' ytics='1' ytics2='3'
   * Set multiDataTest16 = name="multiDataTest16" scale='semilog' type='combo' subtype='line, bar' subtype2='pline, bar' table='table6' data='R2:C4..R9:C5' data2='R2:C6..R9:C7' xaxis='R2:C1..R9:C1' title='Multidata Test16: Left and right axis' yaxis='on' yaxis2='on' ylabel='Left Y-axis label' legend='R1:C4..R1:C7' ymin='1' ymin2='1'

-----------------------------------------------------------
-- Define some datalabel tests.
-----------------------------------------------------------
   * Set datalabel01 = name='datalabel01' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='data legend test #01' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='box'
   * Set datalabel02 = name='datalabel02' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='data legend test #02' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='on, box, off, 2 box'
   * Set datalabel03 = name='datalabel03' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='data legend test #03' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='auto box, 2box, box 3, 4 box'
   * Set datalabel04 = name='datalabel04' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='data legend test #04' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='auto box, 2box, box 3, 4 box' bgcolor='#FFFFFF, #FFFFFF, #E0E0E0'
   * Set datalabel05 = name='datalabel05' table='table1' type='line' data='R2:C4..R7:C7' xaxis='R2:C2..R7:C2' title='data legend test #05' yaxis='on' ymin='0' ymax='100' ylabel='Hello there' xlabel='Yep, an X label' datalabel='auto box, 2box, box 3, 4 box' bgcolor='#FFFFFF, #FFFFFF, transparent'

-----------------------------------------------------------
-- Define some constant data tests
-----------------------------------------------------------
   * Set constDataTest01 = name="constDataTest01" type='line' table='table1' data='R2:C4..R99:C7' xaxis='R2:C2..R7:C2' title='Constant data test #01' yaxis='on' legend='R1:C4..R1:C7' ymin='0'
   * Set constDataTest02 = name="constDataTest02" type='line' table='table1' data='R2:C4..R99:C7,50' xaxis='R2:C2..R7:C2' title='Constant data test #02' yaxis='on' legend='R1:C4..R1:C7,--50--' ymin='0'
   * Set constDataTest03 = name="constDataTest03" type='line' table='table1' data='R2:C4..R99:C7,50' xaxis='R2:C2..R7:C2' title='Constant data test #03' yaxis='on' legend='line 1, Line2,line3 3 3 3,4,--50--' ymin='0'

-----------------------------------------------------------
-- Define some constant data tests
-----------------------------------------------------------
   * Set transparentTest01 = name="transparentTest01" type='line' table='table1' data='R2:C4..R99:C7' xaxis='R2:C2..R7:C2' title='Constant data test #01' yaxis='on' legend='R1:C4..R1:C7' ymin='0'

-----------------------------------------------------------
-- Define the error tests
-----------------------------------------------------------
   * Set errorTest01 = ""
   * Set errorTest02 = name='errorTest02'
   * Set errorTest03 = name='errorTest03' type='badtype' data='R2:C7..R7:C7'
   * Set errorTest04 = name='errorTest04' topic='TopicDoesNotExist' data='R2:C7..R7:C7'
   * Set errorTest05 = name='errorTest05' web='WebDoesNotExist' data='R2:C7..R7:C7'
   * Set errorTest06 = name='errorTest06' table='999' data='R2:C7..R7:C7'
   * Set errorTest07 = name='errorTest07' data='R2:C4..R7:C7' xaxis='R2:C4..R7:C7'
   * Set errorTest09 = name='errorTest09' data='R2:C4..R7:C7' ymin='10' ymax='10'
   * Set errorTest10 = name='errorTest10' data='R2:C4..R7:C7' ymin='10' ymax='-10'
   * Set errorTest11 = name='errorTest11' data='R2:C4..R2:C4'
   * Set errorTest12 = name='errorTest12' data='R2:C4..R7:C7' legend='R1:C4'
   * Set errorTest13 = name='errorTest13' data='R2:C3..R7:C7' scale='semilog'
   * Set errorTest14 = name='errorTest14' data='R2:C4..R7:C7' legend='R1:C4' showerror='image'
   * Set errorTest15 = name='errorTest15' data='R2:C4..R7:C7' legend='R1:C4' showerror='none'
   * Set errorTest16 = name='errorTest16' data='R2:C4..R7:C7' legend='R1:C4' showerror='text'
   * Set errorTest17 = name='errorTest17' data='R2:C4..R7:C7' legend='R1:C4' width='200' height='200' showerror='image'
   * Set errorTest18 = name='errorTest18' type='combo' subtype='line sparkline' data='R2:C4..R7:C4,R2:C5..R7:C5' width='200' height='200'
   * Set errorTest19 = name='errorTest19' type='sparkbar' subtype='line bar' data='R2:C4..R7:C4' width='200' height='200'
   * Set errorTest20 = name='errorTest20' data='R2:C4..R2:C4' data2='R2:C4..R2:C4' errmsg_nodata="No data available to chart"
   * Set errorTest21 = name='errorTest21' data='R2:C4..R7:C4' data2='R2:C4..R2:C4' errmsg_nodata2="No data2 data available to chart"

-->

---+ General tests
---++ line tests
| Simple single line.  No other markings at all. %CHART{%lineTest01%}% |
| Add =title= = "line test #2" and enable =ygrids= to above. %CHART{%lineTest02%}% |
| Add X axis lables to above. %CHART{%lineTest03%}% |
| Add Y axis lables to above. %CHART{%lineTest04%}% |
| Add =ymin= = 0 to above. %CHART{%lineTest05%}% |
| Add =ymax= = 150 to above. %CHART{%lineTest06%}% |
| Add =ylabel= = "Hello there" to above and change =ymax= = 100. %CHART{%lineTest07%}% |
| Add =numygrids= = "5" to above. %CHART{%lineTest08%}% |
| Change =numygrids= = "2" to above. %CHART{%lineTest09%}% |
| Remove =numygrids= from above and add =xlabel= "Yep, an X label" to above. %CHART{%lineTest10%}% |
| Add =datalabel= = =on= to above. %CHART{%lineTest11%}% |
| Change =datalabel= = =box= to above. %CHART{%lineTest12%}% |
| Add =legend= to above. %CHART{%lineTest13%}% |
| Add additional data lines to above and update =legend= to above. %CHART{%lineTest14%}% |
| Specify different line colors to above. %CHART{%lineTest15%}% |
| Specify different line colors to above where line "Acceptable" has a color of =transparent= so the background color will be seen as the line color. %CHART{%lineTest15b%}% |
| Restore default colors and change =datalabel= such that only the last line has values in boxes and the 2nd to last has values (no box) to above. %CHART{%lineTest16%}% |
| Add =bgcolor="#EEEEEE" to above. %CHART{%lineTest17%}% |
| Change =bgcolor="#FFFFFF #EEEEEE"= to above. %CHART{%lineTest18%}% |
| Change =bgcolor="#EEEEEE #EEFFEE"= to above. %CHART{%lineTest19%}% |
| Change =bgcolor="transparent #FFFFFF"= to above. So the outside color should be transparent allowing the background color (green) to show through. %CHART{%lineTest19b%}% |
| Change =bgcolor="#FFFFFF transparent"= to above. So the inside color should be transparent allowing the background color (green) to show through. %CHART{%lineTest19c%}% |
| Change =bgcolor="transparent transparent"= to above. So both the inside and outside color should be transparent allowing the background color (green) to show through. %CHART{%lineTest19d%}% |
| Restore =bgcolor= and add =ygrid= = =on= (changing from dotted ygrid to solid ygrid) to above. %CHART{%lineTest20%}% |
| Change =ygrid= = =off= to above. %CHART{%lineTest21%}% |
| Add =xgrid= = =on= (changing from dotted xgrid to solid xgrid) to above. %CHART{%lineTest22%}% |
| Change =xgrid= = =off= to above. %CHART{%lineTest23%}% |
| Change =width= = =450= to above. %CHART{%lineTest24%}% |
| Change =height= = =150= to above. %CHART{%lineTest25%}% |
| Default width/height.  Get data from %WEB%.ChartPluginTestsRemote.  Specify =table="2"= on new =topic= = =ChartPluginTestsRemote=.  Actual values should show up incremented by 0.52 since data is from a different topic page and the 0.02 denotes the data is from the 2nd table.  Legend should show up with =Remote= since the data on the remote page was set up to include =Remote= in the legends to above. %CHART{%lineTest26%}% |
| Same as above except add an additional data set (*averages*) that is calculated by %<nop>CALC%. %CHART{%lineTest27%}% |
| Back to local data and add the =alt= tag = =This is the alt tag for test28=. %CHART{%lineTest28%}% |
| Show a chart from table5 where the table contains numbers surrounded by HTML tags. %CHAR{%lineTest29%}% |
| Show a chart from table5 where the table contains exponential formated numbers. %CHART{%lineTest30%}% |
| Show a chart from table5 where all the values are identical (=10). %CHART{%lineTest31%}% |
| Show a chart from table5 where the table contains the same numbers and setting ymin = the same #. %CHART{%lineTest32%}% |
| Show a chart from table5 where the table contains the same numbers and setting ymax = the same #. %CHART{%lineTest33%}% |
| Show a chart from table5 setting =ymin= = =0= and =ymax= = =123=. %CHART{%lineTest34%}% |
| Show a chart with =ytics= = =2=. %CHART{%lineTest35%}% |
| Show a chart with =ytics= = =5=. %CHART{%lineTest36%}% |

---++ area tests
| Simple single area.  No other markings at all. %CHART{%areaTest01%}% |
| Add Title to above. %CHART{%areaTest02%}% |
| Add X axis to above. %CHART{%areaTest03%}% |
| Add Y axis to above. %CHART{%areaTest04%}% |
| Add =ymin= = 0 to above. %CHART{%areaTest05%}% |
| Add =ymax= = 150 to above. %CHART{%areaTest06%}% |
| Add =ylabel= "Hello there" to above. %CHART{%areaTest07%}% |
| Add =numygrids="5"= to above. %CHART{%areaTest08%}% |
| Change =numygrids="2"= to above. %CHART{%areaTest09%}% |
| Remove =numygrids= and =ymax= from above and add =xlabel= "Yep, an X label" to above. %CHART{%areaTest10%}% |
| Add =datalabel= = =on= to above. %CHART{%areaTest11%}% |
| Add =datalabel= = =box= to above. %CHART{%areaTest12%}% |
| Add =legend= = to above. %CHART{%areaTest13%}% |
| Add additional data areas and update =legend= to above. %CHART{%areaTest14%}% |
| Specify different colors to above.  Now are lite red, lite green, lite blue, gray instead of defaults. %CHART{%areaTest15%}% |
| Specify different colors to above where line "Acceptable" has a color of =transparent= so the background color will be seen as the area color. %CHART{%areaTest15b%}% |
| Restore default colors and change =datalabel= such that only the last area has values in boxes and the 2nd to last has values (no box) to above. %CHART{%areaTest16%}% |
| Add =bgcolor="#AAAAAA"= to above. %CHART{%areaTest17%}% |
| Change =bgcolor="#FFFFFF #EEEEEE"= to above. %CHART{%areaTest18%}% |
| Change =bgcolor="#EEEEEE #EEFFEE"= to above. %CHART{%areaTest19%}% |
| Restore =bgcolor= and change =ygrid= = =on= to above. %CHART{%areaTest20%}% |
| Change =ygrid= = =off= to above. %CHART{%areaTest21%}% |
| Change =xgrid= = =on= to above. %CHART{%areaTest22%}% |
| Change =xgrid= = =off= to above. %CHART{%areaTest23%}% |
| Add =width= = =450= to above. %CHART{%areaTest24%}% |
| Add =height= = =150= to above. %CHART{%areaTest25%}% |
| Default width/height.  Get data from %WEB%.ChartPluginTestsRemote.  Specify =table="2"= on new =topic= = =ChartPluginTestsRemote=.  Actual values should show up incremented by 0.52 since data is from a different topic page and the 0.02 denotes the data is from the 2nd table.  Legend should show up with =Remote= since the data on the remote page was set up to include =Remote= in the legends. %CHART{%areaTest26%}% |
| Same as above except add an additional data set (*averages*) that is calculated by %<nop>CALC%.  Also shows that since only 4 default area colors are specified, the 5th area reuses the 1st default area color. %CHART{%areaTest27%}% |
| Change =title= to above and add the =alt= tag = =This is the alt tag=. %CHART{%areaTest28%}% |

---++ bar tests
| Simple single bar.  No other markings at all. %CHART{%barTest01%}% |
| Add Title to above. %CHART{%barTest02%}% |
| Add X axis to above. %CHART{%barTest03%}% |
| Add Y axis to above. %CHART{%barTest04%}% |
| Add =ymin= = 0 to above. %CHART{%barTest05%}% |
| Add =ymax= = 150 to above. %CHART{%barTest06%}% |
| Add =ylabel= "Hello there" to above. %CHART{%barTest07%}% |
| Add =numygrids="5"= to above. %CHART{%barTest08%}% |
| Change =numygrids="2"= to above. %CHART{%barTest09%}% |
| Remove =numygrids= and =ymax= from above and add =xlabel= "Yep, an X label" to above. %CHART{%barTest10%}% |
| Add =datalabel= = =on= to above. %CHART{%barTest11%}% |
| Add =datalabel= = =box= to above. %CHART{%barTest12%}% |
| Add =legend= = to above. %CHART{%barTest13%}% |
| Add additional data bars and update =legend= to above. %CHART{%barTest14%}% |
| Specify different colors to above.  Now are lite red, lite green, lite blue, gray instead of defaults. %CHART{%barTest15%}% |
| Specify different colors to above where bar "Acceptable" has a color of =transparent= so the background color will be seen as the bar color. %CHART{%barTest15b%}% |
| Restore default colors and change =datalabel= such that only the last bar has values in boxes and the 2nd to last has values (no box) to above. %CHART{%barTest16%}% |
| Add =bgcolor="#AAAAAA"= to above. %CHART{%barTest17%}% |
| Change =bgcolor="#FFFFFF #EEEEEE"= to above. %CHART{%barTest18%}% |
| Change =bgcolor="#EEEEEE #EEFFEE"= to above. %CHART{%barTest19%}% |
| Restore =bgcolor= and change =ygrid= = =on= to above. %CHART{%barTest20%}% |
| Change =ygrid= = =off= to above. %CHART{%barTest21%}% |
| Change =xgrid= = =on= to above. %CHART{%barTest22%}% |
| Change =xgrid= = =off= to above. %CHART{%barTest23%}% |
| Add =width= = =450= to above. %CHART{%barTest24%}% |
| Add =height= = =150= to above. %CHART{%barTest25%}% |
| Default width/height.  Get data from %WEB%.ChartPluginTestsRemote.  Specify =table="2"= on new =topic= = =ChartPluginTestsRemote=.  Actual values should show up incremented by 0.52 since data is from a different topic page and the 0.02 denotes the data is from the 2nd table.  Legend should show up with =Remote= since the data on the remote page was set up to include =Remote= in the legends. %CHART{%barTest26%}% |
| Same as above except add an additional data set (*averages*) that is calculated by %<nop>CALC%.  Also shows that since only 4 default bar colors are specified, the 5th bar reuses the 1st default bar color. %CHART{%barTest27%}% |
| Change =title= to above and add the =alt= tag = =This is the alt tag=. %CHART{%barTest28%}% |

---++ combo tests
| Simple combo graph using table #2.  Since no =datatype= is defined and only a single data set, =combo= defaults to a single =line=. %CHART{%comboTest01%}% |
| Change so 3 data sets are drawn as areas and the last drawn as a line. %CHART{%comboTest02%}% |
| Same as above, adding grid lines and Y axis labels and X/Y titles. %CHART{%comboTest03%}% |
| Same as above adding =subtype="area"= which should force all data sets to be drawn as =area=.  Since the last data set would fall behind the previously drawn areas, it is drawn as a line. %CHART{%comboTest04%}% |
| Same as above adding =subtype="line"= which should force all data sets to be drawn as =line=. %CHART{%comboTest05%}% |
| Same as above adding =subtype="bar"= which should force all data sets to be drawn as =bar=. %CHART{%comboTest06%}% |
| Same as above adding =subtype="pline"= which should force all data sets to be drawn as =pline=. %CHART{%comboTest07%}% |
| Same as above adding =subtype="point"= which should force all data sets to be drawn as =point=. %CHART{%comboTest08%}% |
| Same as above changing =subtype="area line pline point"=. %CHART{%comboTest09%}% |
| Same as above changing =subtype="line pline point area"=. %CHART{%comboTest10%}% |
| Same as above changing =subtype="pline pline point bar"=. %CHART{%comboTest11%}% |

---++ scatter tests
| Simple scatter graph using table #3.  Defaults to all data sets drawn as =point=. %CHART{%scatterTest01%}% |
| Add title, grid lines and both X and Y axis labels and title to above. %CHART{%scatterTest02%}% |
| Add =subtype="line"= to above. %CHART{%scatterTest03%}% |
| Change =subtype="pline"= to above. %CHART{%scatterTest04%}% |
| Change =subtype="point"= to above. %CHART{%scatterTest05%}% |
| Change =subtype="bar"= to above. %CHART{%scatterTest06%}% |
| Change =subtype="point bar line pline"= to above. %CHART{%scatterTest07%}% |
| Change =subtype="bar line pline point"= to above. %CHART{%scatterTest08%}% |
| Change =subtype="line pline point bar"= to above. %CHART{%scatterTest09%}% |
| Change =subtype="pline point bar line"= to above. %CHART{%scatterTest10%}% |
| Change =subtype="bar bar bar pline"= to above. %CHART{%scatterTest11%}% |
| Adjust data range to see how the X labeling is affected. %CHART{%scatterTest12%}% |
| Adjust data range to see how the X labeling is affected. %CHART{%scatterTest13%}% |

---++ Spark tests
| Simple spark line using data from table #1. %CHART{%sparkTest01%}% |
| Simple spark bar using data from table #1. %CHART{%sparkTest02%}% |
| Simple spark area using data from table #1. %CHART{%sparkTest03%}% |
| Simple spark line using directly specified data (no data from any table). %CHART{%sparkTest04%}% |
| Simple spark bar using directly specified data (no data from any table). %CHART{%sparkTest05%}% |
| Simple spark area using directly specified data (no data from any table). %CHART{%sparkTest06%}% |
| Simple spark line using directly specified data (no data from any table), but with twice as much data as above. %CHART{%sparkTest07%}% |
| Simple spark bar using directly specified data (no data from any table), but with twice as much data as above. Since there is so much data displayed in such a narrow width, the bars are of uneven width. %CHART{%sparkTest08%}% |
| Same as above, but by setting =width="0"= the chart width is auto calculated such that the bars have equal widths. %CHART{%sparkTest09%}% |
| Simple spark area using directly specified data (no data from any table), but with twice as much data as above. %CHART{%sparkTest10%}% |

---++ Test various legend placement situations
| Test that when all lines overlap on the very bottom of the chart, the legends all show up non-overlapped. %CHART{%legendTest01%}% |
| Test that when two lines overlap in the middle of the chart, the legends get correctly placed. %CHART{%legendTest02%}% |
| Similar to the test above, except the data is changed such that the placement of the legends for the two middle lines should be reversed. %CHART{%legendTest03%}% |
| Test that when 4 lines are close to overlapping and are all located at the top of the chart, the legends get correctly placed. %CHART{%legendTest04%}% |
| Test that when 4 lines do exactly overlap at the top of the chart, the legends get correctly placed. %CHART{%legendTest05%}% |
| Test that the arrangement of legends of 4 lines located at the top of a chart is correct. %CHART{%legendTest06%}% |
| Test that even with a =ymax= set too low such that the lines go off the top of the chart, the legends still stay on the chart. %CHART{%legendTest07%}% |
| Test that even with a =ymin= set too high such that some lines do not even show up on the chart because they fall below the chart, the legends still stay on the chart. %CHART{%legendTest08%}% |
| Test extremes that even when =ymin= is set higher than all data, that the legends still get drawn on the chart. %CHART{%legendTest09%}% |
| Test extremes that even when =ymax= is set lower than all data, that the legends still get drawn on the chart. %CHART{%legendTest10%}% |

---++ Test _numxgrids_ and _xaxisangle_ options
| Show what happens when there is so much data that the X axis labels overlap. %CHART{%gridTest01%}% |
| Take the above graph and specify =numxgrids= = "3" making the X axis labels more readable. %CHART{%gridTest02%}% |
| Take the first graph and specify =xaxisangle= = 90, changing the X axis label angle = 90 degrees. %CHART{%gridTest03%}% |

---++ Test _scale_ and _ytics_ options
| Show how =scale=semilog= makes the chart easier to read. Since =ytics= is NOT specified, it defaults to 8. %CHART{%semilogTest01%}% |
| Add =ytics=4= to above. %CHART{%semilogTest02%}% |
| Change the amount of data displayed which should change the ymin/ymax. %CHART{%semilogTest03%}% |
| Show the above plotted data on a =linear= scale with =ytics=1=. %CHART{%semilogTest04%}% |

---++ Test _defaultdata_ option
| Show a chart with sparse data. %CHART{%defaultsTest01%}% |
| Same as above, but setting =defalutdata=0=. %CHART{%defaultsTest02%}% |
| Same as above, but setting =defalutdata=10=. %CHART{%defaultsTest03%}% |

---++ Test _gridcolor_ option
| Show default grid color with solid grid lines. %CHART{%colorTest01%}% |
| Change the grid color to blue. %CHART{%colorTest02%}% |
| Change the grid color back to the default but make them dotted. %CHART{%colorTest03%}% |
| Change the grid style to be 5 black dots and 5 transparent dots. %CHART{%colorTest04%}% |
| Change the grid style to be 4 red dots, 4 green dots, 4 blue dots and 4 transparent dots. %CHART{%colorTest05%}% |
| Change the grid style to be 1 black dot which basically makes a solid line. %CHART{%colorTest06%}% |
| Change the grid color to =transparent=. %CHART{%colorTest07%}% |

---++ Test _datalegend_ option
| Show a simple chart with =datalabel="box"=. %CHART{%datalabel01%}% |
| Same chart, but =datalabel="on, box, off, 2 box"=. %CHART{%datalabel02%}% |
| Same chart, but =datalabel="auto box, 2box, box 3, 4 box"=. %CHART{%datalabel03%}% |
| Same chart as above, but set the background color in the =datalabel= boxes to #E0E0E0. %CHART{%datalabel04%}% |
| Same chart as above, but set the background color in the =datalabel= boxes to =transparenet=. %CHART{%datalabel05%}% |

---++ Tests showing both single column data ranges as well as multi-column data ranges both top to bottom as well as bottom to top and left to right and right to left.

| This chart is <nop>WebStatistics data in its original order. %CHART{%multiLineTest01f%}% |
| This chart is the same as above but with the <nop>WebStatistics data in a more human readable format of old -&gt; new. %CHART{%multiLineTest01b%}% |
| This is a single line top/down chart. %CHART{%multiLineTest02f%}% |
| This is a single line bottom/up chart and should be flipped left-to-right from the chart above. %CHART{%multiLineTest02b%}% |
| This is a top/down, left/right chart with 4 lines in a single range. %CHART{%multiLineTest03f%}% |
| This is a bottom/up left/right chart and should be flipped left-to-right from the chart above. Because the data is read in reverse order, the line colors will be different. %CHART{%multiLineTest03b%}% |
| This is a top/down right/left chart with 4 lines in a single range. %CHART{%multiLineTest04f%}% |
| This is a bottom/up right/left chart and should be flipped left-to-right from the chart above. Because the data is read in reverse order, the line colors will be different. %CHART{%multiLineTest04b%}% |
| This should be identical to test 04b above except instead of specifying multi-column data range, this specifies 4 single column data ranges. The results should be identical to above. %CHART{%multiLineTest05f%}% |
| This should be identical to the chart above except reversed. %CHART{%multiLineTest05b%}% |
| This is identical to test 04b above except the 4 single column data ranges are specified in a random order. The results should be identical with the exception that the line colors will be different. %CHART{%multiLineTest06f%}% |
| Flipped version of the above chart. %CHART{%multiLineTest06b%}% |
| This is identical to test 06f above except a multi-column range followed by a single column range. The results should be identical with the exception that the line colors will be different. %CHART{%multiLineTest07f%}% |
| Flipped of the above chart. %CHART{%multiLineTest07b%}% |
| Same as test 07f, but using areas. Still top/down chart with 4 lines. %CHART{%multiAreaTest01f%}% |
| Flipped version of the above chart. Still bottom/up chart. Because the data is read in reverse order, the area colors will be different. %CHART{%multiLineTest08b%}% |

---++ Same tests as above, but the data is flipped on the diagonal
| This is a left/right chart. %CHART{%flippedMultiLineTest01f%}% |
| This is a right/left bottom/up chart and should be flipped left-to-right from the above chart. %CHART{%flippedMultiLineTest01b%}% |
| This is a left/right chart with 4 lines. %CHART{%flippedMultiLineTest03f%}% |
| This is a right/left chart and should be flipped left-to-right from the above chart. Because the data is read in reverse order, the line colors will be different. %CHART{%flippedMultiLineTest03b%}% |
| This should be identical to test 02f above except instead of specifying multi-column data range, this specifies 4 single column data ranges. The results should be identical to 02f above. %CHART{%flippedMultiLineTest04f%}% |
| This should be identical to the above except instead of specifying a Multi-column data range, this specifies 4 single column data ranges in reverse order. Because the data is read in reverse order, the line colors will be different. %CHART{%multiLineTest04b%}% |
| This is identical to test 04f above except the 4 single column data ranges are specified in a random order. The results should be identical to above with the exception that the line colors will be different. %CHART{%flippedMultiLineTest05f%}% |
| Flipped of chart above. %CHART{%flippedMultiLineTest05b%}% |
| This is identical to test 05f above except a multi-column range followed by a single column range. The results should be identical to above with the exception that the line colors will be different. %CHART{%flippedMultiLineTest06f%}% |
| Flipped of chart to the left. %CHART{%flippedMultiLineTest06b%}% |
| This is the same as test 06f above, but using areas. Still left/right chart with 4 lines. %CHART{%flippedMultiAreaTest01f%}% |
| This is the same as above, but using areas. Still right/left chart and should be flipped left-to-right from the chart to the left. Because the data is read in reverse order, the area colors will be different. %CHART{%flippedMultiAreaTest01b%}% |

---++ Tests showing data displayed on both the left Y-axis and right Y-axis
| Simple chart with =data= only so all data is in reference to the left Y-axis. %CHART{%multiDataTest01%}% |
| Same chart as above with 3 lines referenced to the left Y-axis and 1 line referenced to the right Y-axis. %CHART{%multiDataTest02%}% |
| Same chart as above with 1 line referenced to the left Y-axis and 3 lines referenced to the right Y-axis. %CHART{%multiDataTest03%}% |
| Same chart as above with 2 lines referenced to the left Y-axis and 2 lines referenced to the right Y-axis, but the right axis has different =ymin2= and =ymax2= from the left axis values. %CHART{%multiDataTest04%}% |
| Same as above with no =yaxis2=. %CHART{%multiDataTest05%}% |
| Same as above with =yaxis2= turned back on and =ylabel2= disabled. %CHART{%multiDataTest06%}% |
| Same as above with =ytics="1"= and =ytics2="3"=. %CHART{%multiDataTest07%}% |
| Same as above, but =type="area"=. =area= should only apply to =data= data so =data2= data should still default to =line=. %CHART{%multiDataTest08%}% |
| Same as above, but changing =type="combo"= and adding =subtype="area, area"=. So this should look identical to the above since =data2= is still defaulting to =line=. %CHART{%multiDataTest09%}% |
| Same as above, but setting =subtype2="area, area"= and changing =ymin2='-5' and =ymax2='10'= so =data2= data is shown above =data= data so you can see the =area=.  %CHART{%multiDataTest10%}% |
| Same as above except change =data= and =data2= from =area= to =bar=. %CHART{%multiDataTest11%}% |
| Same as above except change =data= and =data2= from =bar= to =pline=. %CHART{%multiDataTest12%}% |
| Same as above except change =data= to ="line, pline" and change =data2= ="pline, bar". %CHART{%multiDataTest13%}% |
| Same as above except change =data= to ="line, bar". %CHART{%multiDataTest14%}% |
| Same as above except change =type="scatter"=. %CHART{%multiDataTest15%}% |
| Same as above except change =type="semilog"=, =ymin="1", =ymin2="1"=, and removing definition for =ytics=, =ytics=, =ymax=, and =ymax2=. %CHART{%multiDataTest16%}% |

---++ Constant data tests (both in =data= and =legend=
| Sample 4 line chart. %CHART{%constDataTest01%}% |
| Same as above, but adding a constant value = ="50"= to =data= as well as adding a =datalegend= for this new data set = ="--50--"=. %CHART{%constDataTest02%}% |
| Same as above, but using constant values for =legend= instead of data from the table. %CHART{%constDataTest03%}% |

---++ Error handling tests
| *Description* | *Expected Output* | *Output* |
| No parameters passed to CHART %BR% =%<nop>CHART{%errorTest01%}%= | <nop>ChartPlugin error: parameter *name* must be specified | %CHART{%errorTest01%}% |
| =name= defined, but no data specified. %BR% =%<nop>CHART{%errorTest02%}%= | <nop>ChartPlugin error: parameter *data* must be specified | %CHART{%errorTest02%}% |
| Invalid =type= of =badtype=. %BR% =%<nop>CHART{%errorTest03%}%= | <nop>ChartPlugin error: ChartPlugin error: Invalid value of *badtype* for parameter *type* | %CHART{%errorTest03%}% |
| Specified =topic= page does not exist. %BR% =%<nop>CHART{%errorTest04%}%= | <nop>ChartPlugin error: Error retrieving TWiki topic <nop>TWiki.TopicDoesNotExist | %CHART{%errorTest04%}% |
| Specified =web= page does not exist. %BR% =%<nop>CHART{%errorTest05%}%= | <nop>ChartPlugin error: Error retrieving TWiki topic <nop>webDoesNotExist.ChartPluginTests | %CHART{%errorTest05%}% |
| Invalid table number. %BR% =%<nop>CHART{%errorTest06%}%= | <nop>ChartPlugin error: parameter table is not valid table; the specified *table* '999' does not exist | %CHART{%errorTest06%}% |
| invalid =xaxis= value. %BR% =%<nop>CHART{%errorTest07%}%= | <nop>ChartPlugin error: parameter *xaxis* specifies multiple (6x4) rows and columns | %CHART{%errorTest07%}% |
| =ymin= == =ymax= such that there is no chart height. %BR% =%<nop>CHART{%errorTest09%}%= | <nop>ChartPlugin error: chart error: name=errorTest09: No Chart height with ymin(10) == ymax(10) | %CHART{%errorTest09%}% |
| =ymin= > =ymax=. %BR% =%<nop>CHART{%errorTest10%}%= | <nop>ChartPlugin error: chart error: name=errorTest10: Y max (-10) < Y Min (10) | %CHART{%errorTest10%}% |
| Only 1 point of data. %BR% =%<nop>CHART{%errorTest11%}%= | <nop>ChartPlugin error: chart error: name=errorTest11: Error: Number of data points needs to be > 1 | %CHART{%errorTest11%}% |
| Invalid =legend=. %BR% =%<nop>CHART{%errorTest12%}%= | <nop>ChartPlugin error: parameter *legend* contains an invalid value 'R1:C4' since it specifies 1 legends and there are 4 data sets. | %CHART{%errorTest12%}% |
| =scale=semilog= and data &lt;= 0. %BR% =%<nop>CHART{%errorTest13%}%= | <nop>ChartPlugin error: data (0) &lt;= 0 not valid when scale=semilog | %CHART{%errorTest13%}% |
| Same =legend= error as above, but show the error inside of an image by setting =showerror='image'=. %BR% =%<nop>CHART{%errorTest14%}%= | <nop>ChartPlugin error: parameter *legend* contains an invalid value 'R1:C4' since it specifies 1 legends and there are 4 data sets. | %CHART{%errorTest14%}% |
| Same =legend= error as above, but now no error should appear since setting =showerror='none'=. %BR% =%<nop>CHART{%errorTest15%}%= | &lt;nothing should be seen&gt; | %CHART{%errorTest15%}% |
| Same =legend= error as above, but show the error in text form since setting =showerror='text'=. %BR% =%<nop>CHART{%errorTest16%}%= | <nop>ChartPlugin error: parameter *legend* contains an invalid value 'R1:C4' since it specifies 1 legends and there are 4 data sets. | %CHART{%errorTest16%}% |
| Same =legend= error as above, but show the error inside of an image by setting =showerror='image'=. Also, the image size will be different since =width= and =height= have been specified.  %BR% =%<nop>CHART{%errorTest17%}%= | <nop>ChartPlugin error: parameter *legend* contains an invalid value 'R1:C4' since it specifies 1 legends and there are 4 data sets. | %CHART{%errorTest17%}% |
| Mixing a regular =line= with =sparkline=. | <nop>ChartPlugin error: unkown subtypes: sparkline. | %CHART{%errorTest18%}% |
| Mixing a regular =line= with =sparkline=. | <nop>ChartPlugin error: subtype can not be used when type = 'sparkbar' | %CHART{%errorTest19%}% |
| Show custom error message%BR% =%<nop>CHART{%errorTest20%}%= | Should see a custom user error msg about "No data available to chart". | %CHART{%errorTest20%}% |
| Show custom error message%BR% =%<nop>CHART{%errorTest21%}%= | Should see a custom user error msg about "No data2 data available to chart". | %CHART{%errorTest21%}% |

-- __Contributors:__ TWiki:Main/TaitCyrus, TWiki:Main/PeterThoeny - 2010-04-07
-- Updated: TWiki:Main/TaitCyrus - 2011-04-25
This topic: TWiki > ChartPlugin > ChartPluginTests
Topic revision: r2 - 2014-11-04 - TWikiAdminUser
Copyright © 1999-2025 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding PlanetoWiki? Send feedback
Note: Please contribute updates to this topic on TWiki.org at TWiki:TWiki.ChartPluginTests.